Professional product photography, bird's-eye view, clean white cyclorama, soft overhead lighting, 50mm lens, f/8, sharp across the full product.

Generate exactly ONE single product using the three reference images as strict guides. Reference image 1 defines the base platform with dominant wood Go board, very thin border, right-side service spine, and half-embedded round bowls. Reference image 2 defines the folding bridge-mast footprint at the rear-right corner. Reference image 3 defines the 4DOF mechanical arm and its compact tip with rotating stone-pick wheel.

From above, the product footprint is slightly wider than deep. The wood Go board fills about four-fifths of the width and almost the full depth, with an even slim warm off-white frame around it. The 19x19 grid must fill almost the entire wood panel area, nearly edge to edge, with star points clearly visible. Do not leave wide blank wood margins. The left and right bowls appear as round bowl openings partially embraced by the body, not as rectangular trays. The right-side service spine forms a continuous structural strip leading into the rear-right bridge-mast base.

At the rear-right corner, show the bridge-mast top module as a refined integrated head with visible lens geometry and terracotta ring-light accent. The mechanical arm extends from that same right-rear system and clearly reads as a four-joint tabletop arm, not a two-link toy arm. The tip hovers above a board intersection; the small rotating stone-pick wheel is visible near the pickup head. The front edge remains clean with only tiny status details. Colors and materials remain consistent with the references: warm wood board, warm off-white body, deep warm-gray structure. No logos, no text overlays, no duplicate devices, no drawer bowls, no oversized screen, no front camera.